Share on Facebook
Trying to purchase the best carbide split point with best review?
See the best list for carbide split point that you can buy online.
Finding the Top carbide split point can be tiring and time consuming but we got the list for you.
Check out the list below to find the product you were looking for.
1. Micro 100, RTC-250-2, Right Hand Cut, Double Ended, Split-End, 30° Included Angle Engraving Tool, 3/8" Split Length, .004" Offset Point, 1/4" Shank Diameter, 2.5" Overall Length, Solid Carbide Tool (Click Link to Check Price on Amazon)
Editor's Rating : 9.3 out of 10
60° Included Angle Engraving ToolRelieved for Right-Hand Cut and single and double ended
Editor's Rating : 9.3 out of 10
60° Included Angle Engraving ToolRelieved for Right-Hand Cut and single and double ended
2. No.25 (.1495) DIA. Carbide Drill, 118 Degree Split Point (Click Link to Check Price on Amazon)
Editor's Rating : 9.5 out of 10
No.25 (.1495) DIA. X 1-3/8" LOC X 2-1/2" OAL118 Degree Split Point
Editor's Rating : 9.5 out of 10
No.25 (.1495) DIA. X 1-3/8" LOC X 2-1/2" OAL118 Degree Split Point
3. Greenlee 645-001 ¼ Inches x 2-1/2 Inch Pilot Drill used with Sizes 5/8-Inch Diameter Through 2-1/4 Inches Diameter Hole Cutters (Click Link to Check Price on Amazon)
Editor's Rating : 9.6 out of 10
Cuts stainless steel quickly and easilyQuick change arbor allows you to change cutter heads with a simple push and a turn
Editor's Rating : 9.6 out of 10
Cuts stainless steel quickly and easilyQuick change arbor allows you to change cutter heads with a simple push and a turn
4. Alfa Tools SCSF30110 13/64" x 2-1/4" Overall Micrograin Solid Carbide Straight Flute 140° Split Point Drill (Click Link to Check Price on Amazon)
Editor's Rating : 8.8 out of 10
Ideal for drilling materials with short powdery chips13/64" Diameter ( 0.2031"), 2-1/4" Overall Length
Editor's Rating : 8.8 out of 10
Ideal for drilling materials with short powdery chips13/64" Diameter ( 0.2031"), 2-1/4" Overall Length
5. Drill Doctor DD750X Drill Bit Sharpener (Click Link to Check Price on Amazon)
Editor's Rating : 9.6 out of 10
Drill bit sharpener sharpens high-speed steel, masonry, carbide, and TiN-coated bitsSharpens 3/32-inch to 3/4-inch standard twist bits and creates split points
Editor's Rating : 9.6 out of 10
Drill bit sharpener sharpens high-speed steel, masonry, carbide, and TiN-coated bitsSharpens 3/32-inch to 3/4-inch standard twist bits and creates split points
Leave a comment, feedback and review below for carbide split point
